BC sea kelp tonic with Vitamin B1 — root development, veg support, and transplant recovery across any media.
TechnaFlora Thrive Alive B1 Red is a concentrated, multi-purpose plant tonic built on premium British Columbian sea kelp and fortified with mineral salt nutrients and Vitamin B1 (0.09%). The 10L format is purpose-sized for commercial facilities running it consistently through propagation, transplant, and early veg phases across hydro, soil, and soilless systems.
Thrive Alive B1 Red is TechnaFlora's mineral-fortified kelp tonic — the 'Red' designation distinguishes it from the organic-only Green version. The formulation delivers a balanced 1-1-1 NPK (1% N, 1% P₂O₅, 1% K₂O) alongside vitamins and growth regulators naturally present in the kelp base, plus added Vitamin B1 (thiamine) at 0.09%.
The nitrogen fraction breaks into ammoniacal (0.5%), nitrate (0.3%), and other water-soluble nitrogen (0.2%) — a mix that moves quickly in solution and stays available across a wide pH range. Mineral sources include Potassium Nitrate, Monopotassium Phosphate, Diammonium Phosphate, Potassium Hydroxide, and Ammonium Nitrate. The kelp component draws from three species: Macrocystis, Nereocystis, and Ascophyllum — each sourced from British Columbia.
The result is a concentrated liquid supplement that blends into any existing nutrient program without displacing primary feed ratios, making it straightforward to layer into both hand-water and automated fertigation lines.
This product earns its place in commercial cannabis and hemp operations primarily during propagation and transplant windows — two of the highest-risk phases in a production cycle. Cuttings under stress, fresh transplants adjusting to new root zones, and mothers being maintained for continuous clone output all respond to the combination of kelp-derived hormones, Vitamin B1, and balanced mineral nutrition.
The 10L size is the right buy for any facility running Thrive Alive B1 Red as a program staple rather than an occasional additive. If it's in your clone room daily or being applied as a foliar every two weeks through veg, a 500mL or 1L moves too fast. The 10L cuts per-liter cost and reduces reorder frequency — practical for multi-room builds, multi-site operators, or anyone batching large volumes of nutrient solution.
It stacks cleanly with TechnaFlora's broader line — including Rootech Cloning Gel during cutting propagation — and is compatible with soil, coco, peat-based soilless, and recirculating or run-to-waste hydro systems.
Thrive Alive B1 Red operates across three distinct application modes. As a root-zone drench, it supports root initiation in fresh cuttings and helps established root systems recover from transplant-related disruption — the kelp fraction delivers natural cytokinins and auxins, while Vitamin B1 is associated with reduced abiotic stress response. As a foliar spray, it is applied through the vegetative cycle and into the first week of flower to support canopy development and maintain leaf health. As a rejuvenator, it can be applied pre-harvest-of-cuttings to keep mother plants producing vigorous new shoots.
When used as a foliar, avoid application under direct HID or high-intensity LED canopy light to prevent heat-related leaf burn. Spray during lights-off or in low-light conditions and allow foliage to dry before the next light cycle.
Because the formula is highly concentrated, accurate dilution is critical. Overuse doesn't produce better results and can contribute to salt buildup in closed recirculating systems. Follow TechnaFlora's published feed chart and confirm EC targets before adding to an existing nutrient line.
In a multi-phase commercial facility, Thrive Alive B1 Red typically lives in the propagation room and the early-veg fertigation program. Clone rooms run it as a drench alongside cloning gel from the moment cuts are taken through root establishment. Transplant teams use it as a soak or immediate post-transplant drench to reduce wilt and loss at the transition point.
Foliar programs through veg can run it biweekly, which means a commercial facility cycling multiple veg rooms will move through product at a predictable rate — the 10L volume aligns with that kind of consistent use. It also integrates into mother-plant maintenance programs where stable vegetative health and shoot vigor are non-negotiable for clone quality.
HSC supplies Thrive Alive B1 Red through our direct TechnaFlora account nationwide. Operators running TechnaFlora programs across multiple facilities or needing bulk quantities can request a quote for volume pricing. Lead times and per-case costs are available on request.
| SKU | TF-BRED-10L |
| Brand | TechnaFlora |
| Container Size | 10 Liters |
| NPK | 1-1-1 |
| Total Nitrogen (N) | 1% (0.5% Ammoniacal, 0.3% Nitrate, 0.2% Other Water Soluble) |
| Available Phosphate (P₂O₅) | 1.0% |
| Soluble Potash (K₂O) | 1.0% |
| Vitamin B1 (Thiamine) | 0.09% (Non-plant food ingredient) |
| Kelp Sources | Macrocystis, Nereocystis, Ascophyllum (British Columbia) |
| Compatible Systems | Hydroponic, soil, soilless (coco, peat-based), run-to-waste, recirculating |
The Green formulation is a natural and organic formula. The Red formulation is fortified with mineral salt nutrients on top of the kelp and Vitamin B1 base, giving it the balanced 1-1-1 NPK profile. Red is the more common choice for commercial hydroponic programs where mineral nutrient precision matters. Green suits organic or living-soil builds.
Yes. It is compatible with recirculating systems. Because it contains mineral salts, monitor your reservoir EC carefully and flush on your normal schedule. Avoid over-application — the concentrate is designed for low-volume dilution, and excess can elevate salt levels in a closed system.
TechnaFlora's guidance is to use it as a foliar spray through the vegetative cycle and into the first week of flower. Most commercial operators discontinue foliar application at the onset of flower development to avoid residue on developing bud sites. Root-zone application timing should follow your facility's specific feed schedule.
If Thrive Alive B1 Red is part of your standard propagation or veg program rather than an occasional additive, smaller sizes create frequent reorder cycles and higher per-liter cost. The 10L is the right format for facilities that run it consistently through clone rooms, transplant protocols, or regular foliar programs across multiple canopy rooms.
HSC supplies TechnaFlora products to licensed cannabis and hemp operators nationwide. There is no geographic restriction on orders — request a quote and we'll confirm availability, lead time, and pricing for your facility's location.
Get operator-direct pricing and availability. We supply licensed commercial cultivators nationwide.
Request a Quote