860W full-canopy LED with 2-channel spectrum tuning across four growth-stage presets — zero moving parts, IP66 rated.
The Matrix M8 860W Dyna 2-Channel (SKU 10-010602-397) delivers 3.0 µmol/J PPE across a 60″ × 48″ bar footprint with two independently controllable spectrum channels — Main Spectrum and Far Red — switchable through four factory presets (Seedling, Vegetative, Early Flower, Late Flower) from a single 0–10V signal. Passive aluminum heat sink, no fans, IP66 sealed, and backed by a 5-year warranty.
The Matrix M8 Dyna 2-Channel is a commercial bar-style LED grow light built for operators who want spectrum control across the full production cycle without the cost or wiring complexity of a full 4-channel system. The fixture runs 860W of actual input power through top-bin diodes sourced from Samsung, Osram, and Seoul Semiconductor, delivering a rated PPE of 3.0 µmol/J.
The '2-channel' designation refers to the spectrum architecture: a Main Spectrum channel (white/deep red) and a Far Red channel, controlled independently through the universal 0–10V interface. Using that single analog signal — from a Matrix MC2, MC5, or any third-party 0–10V controller — the driver steps the fixture through four factory-defined spectrum presets: Seedling, Vegetative, Early Flower, and Late Flower. Power to the main spectrum array stays constant during spectrum shifts, so your total photon output doesn't drop when you dial in more Far Red at transition. That 'power-stable spectrum tuning' is a key differentiator for operators running light-dep or fixed-schedule rooms where energy budget predictability matters.
The M8 Dyna 2-Channel targets licensed cannabis and hemp cultivation operators running single-tier or multi-tier production rooms who want the efficiency of a full-cycle LED with dialed spectrum progression — but don't need the per-channel granularity (or budget) of a 4-channel rig. At 860W and a 60″ × 48″ footprint, one fixture covers a standard 4×5 ft canopy zone at production PPFD levels.
The 120–277V input range and IP66 waterproof rating make it compatible with virtually any commercial electrical infrastructure, from standard 120V single-phase circuits to 277V commercial drops common in warehouse-converted grow facilities. Passive cooling — no fans — eliminates the single most common failure point in commercial LED fixtures, reducing service calls and extending serviceable lifespan in high-humidity environments where wet trimming or irrigation runoff is a reality. Up to 80 fixtures can be daisy-chained, making room-wide automation practical at scale.
Two independently addressable spectrum channels — Main Spectrum (white/deep red mix) and Far Red — allow the fixture to shift its spectral output to match the physiological needs of each production stage without touching power settings. The four preset profiles (Seedling, Vegetative, Early Flower, Late Flower) are accessed via the 0–10V signal: no separate app, no proprietary dongle required beyond the Dyna Control Adapter for Matrix MC2/MC5 users.
Intensity dimming is separate from spectrum tuning and scales from 25% to 100%, giving cultivators independent control over both spectrum and DLI delivery. The built-in driver eliminates external driver mounting, reduces install time, and keeps cable runs clean. The foldable bar design ships flat and deploys without specialized tooling. Unistrut mounting is supported natively, making integration into both fixed overhead and adjustable-height canopy systems straightforward. The fixture is ETL listed and carries a manufacturer 5-year warranty.
In a single-tier room, the M8's 60″ × 48″ footprint aligns well with 4-foot wide rolling bench systems and standard 5-foot row spacing. In a vertical multi-tier build, the fixture's 2.5″ depth keeps inter-canopy clearance viable on standard racking with 24–30″ tier spacing. Because spectrum shifts require no power changes, rooms running the Dyna series don't need additional circuit capacity when transitioning from veg to bloom — the load stays flat at 860W per fixture.
For operators currently running double-ended HPS or fixed-spectrum LEDs, the Dyna 2-Channel offers a defined upgrade path: same footprint conventions, higher efficacy (3.0 µmol/J versus ~1.7–2.0 µmol/J for DE HPS at the fixture), no lamp replacement cycle, and spectrum progression capability that a fixed-spectrum fixture cannot replicate. The universal 0–10V interface means your existing environmental controller — TrolMaster, Argus, Priva, or any 0–10V-capable system — can drive these fixtures without a controller swap.
| SKU | 10-010602-397 |
| Input Power | 860W |
| PPE (Efficacy) | 3.0 µmol/J |
| PPF (Photon Output) | 2,580 µmol/s |
| Input Voltage | 120V / 208V / 240V / 277V |
| Input Current | 7.17A (120V) / 4.13A (208V) / 3.58A (240V) / 3.10A (277V) |
| Dimensions (L × W × H) | 60.0″ × 48.0″ × 2.5″ (1525 × 1220 × 64 mm) |
| Weight | 40.8 lbs (18.5 kg) |
| IP Rating | IP66 |
| Cooling | Passive (fanless) |
| Dimming Range | 25–100% via 0–10V |
| Spectrum Channels | 2-channel (Main Spectrum + Far Red) |
The 2-channel version (this SKU) controls Main Spectrum and Far Red as two addressable channels, stepping through four fixed presets via the 0–10V signal. The 4-channel version adds independent UV and deeper Far Red control, letting cultivators write fully custom light recipes rather than selecting presets. For most single-room operations running a standard photoperiod cycle, the 2-channel system delivers meaningful spectrum progression at lower per-fixture cost and less control system complexity.
Yes. The Dyna 2-Channel uses a universal 0–10V interface, so any controller that outputs a 0–10V analog signal can drive dimming. For spectrum preset switching via a Matrix MC2 or MC5, a Dyna Control Adapter is required. For third-party controllers, dimming operates normally; spectrum preset selection may require manual or basic analog triggering depending on the controller's output resolution.
When the fixture transitions between spectrum presets, the total wattage drawn from the circuit stays at 860W — the driver redistributes power between channels rather than reducing or increasing total load. This matters for two reasons: your per-room electrical load calculation doesn't change across the crop cycle, and your actual photon delivery to the canopy remains consistent even as the spectral ratio shifts.
No. The power cord is sold separately. Ensure you specify the correct cord configuration for your facility's input voltage (120V, 208V, 240V, or 277V) when ordering.
At 60″ × 48″ and 2.5″ deep, the M8 fits cleanly over a standard 4-foot wide grow tier with minimal overhead clearance required. For multi-tier installs, tier spacing of 24–30″ is typical depending on crop height targets. The fanless passive cooling design is particularly advantageous in enclosed vertical environments where active cooling exhaust can disrupt canopy airflow or create heat pockets between tiers.
Get operator-direct pricing and availability. We supply licensed commercial cultivators nationwide.
Request a Quote