OEM 10ft power cord matched to Matrix Linear Toplight fixtures on 240V service.
The Matrix LTL 10ft 240V Power Cord (SKU 10-010704-295) is the factory-matched input cord for Matrix Linear Toplight LED bar fixtures running on 240V circuits — straight configuration with M19 connector for secure, plug-and-play installation.
The Matrix LTL 10ft 240V Power Cord is the OEM-specified input cord for Matrix Linear Toplight (LTL) LED bar fixtures. Matrix sells the LTL fixture and its power cord as separate line items — this is the cord that connects the fixture to your 240V circuit. It uses an M19 3-pin connector on the fixture end and terminates in a straight plug configuration for the wall or panel feed side.
The companion 277V version (a separate SKU) covers facilities wired at 277V commercial service. If your facility runs 240V — common in licensed cannabis and hemp indoor and greenhouse builds — this is the cord to spec. Do not mix voltage-rated cords across service types.
This cord is a required accessory any time a Matrix LTL fixture is ordered without a power cord, or when a replacement is needed due to cord damage, voltage-service changes, or facility expansion. Matrix LTL bars are sold cord-optional, so commercial operators standing up new rooms or adding bars to existing daisy-chain rows will need to account for one cord per feed point.
It is also the right spec for operators converting an existing room to 240V service — swapping 277V cords for 240V cords at each fixture input rather than recabling the full run. If you are purchasing LTL bars through HSC, confirm your electrical service voltage before ordering cords so the right SKU ships with the fixtures.
The M19 connector format is a 3-pin, locking-style shroud connector widely used across commercial horticultural LED fixtures for secure power input. It seats positively into the Matrix LTL fixture input port and resists accidental disconnection in a production environment. The straight cord configuration keeps the fixture-side connection low-profile, which matters in tight overhead installations or where cords run along racking uprights.
At 10 feet, the cord provides enough slack to reach overhead junction boxes or track-mounted outlets without adding extension cords — keeping installation cleaner and reducing potential failure points. Heavy-duty insulation is appropriate for the continuous-duty cycles common in commercial cultivation, where lights run 12–20 hours daily.
Power cord selection is one of the details that gets missed in large fixture orders and causes commissioning delays. When speccing a room of Matrix LTL bars, count the number of independent feed points — each daisy-chain row needs one input cord at the lead fixture. Subsequent fixtures in a daisy-chain share power via inter-fixture jumpers, not individual wall cords.
HSC carries Matrix lighting accessories nationally and can coordinate cord orders alongside LTL fixture orders so both arrive together. If you are unsure whether your facility runs 240V or 277V service, confirm with your electrical contractor or review your panel schedule before ordering — the two cord SKUs are not interchangeable. Contact HSC to request a quote or to include this cord as a line item on an existing LTL fixture order.
| SKU | 10-010704-295 |
| Brand | Matrix |
| Compatible Fixture Line | Matrix Linear Toplight (LTL) |
| Input Voltage | 240V |
| Cord Length | 10 ft |
| Fixture Connector | M19 (3-pin) |
| Cord Configuration | Straight |
| Sold | Individually |
| Alternate Voltage Option | 277V version available (separate SKU) |
No. Matrix sells the LTL fixture and power cord as separate line items. When ordering LTL bars, you need to add the appropriate voltage cord (240V or 277V) as a separate SKU. HSC can combine both on the same order — let us know your service voltage when you reach out.
Check your panel schedule or ask your electrical contractor. Indoor cannabis facilities commonly run 240V; some larger commercial and greenhouse operations are wired at 277V single-phase from a 480V distribution system. The two cords are not interchangeable — ordering the wrong voltage cord means the fixture will not operate correctly or safely.
One input cord per daisy-chain row — it connects at the lead fixture. Fixtures later in the chain receive power through inter-fixture jumper cords, not individual wall cords. Count your independent circuit feed points, not total fixture count, when calculating how many input cords to order.
The M19 3-pin connector format is used across several horticultural LED brands, but Matrix specifies this cord for LTL fixtures only. Always verify voltage rating, amperage rating, and connector fit against the target fixture's specs before substituting cords across brands or product lines.
Yes. HSC supplies licensed cannabis and hemp operators nationwide. This cord can be included alongside a Matrix LTL fixture order or ordered independently and shipped to any U.S. facility. Request a quote through the page CTA and include your shipping address and order quantity.
Get operator-direct pricing and availability. We supply licensed commercial cultivators nationwide.
Request a Quote