Leizig Available

Leizig Remote Controller (R32 Dehumidifier)

Dedicated wall-mount remote for Leizig R32 dehumidifiers — refrigerant-matched, purpose-built.

The Leizig Remote Controller (R32) is the OEM wall-mount control accessory for Leizig dehumidifiers running R32 refrigerant. Match this controller to your R32-charged unit — it is not interchangeable with R410a-equipped models.

R32
Refrigerant Match
Leizig Dehumidifier Line
Compatible Equipment
Wall-Mount
Installation Type
30600152
SKU

What It Is

The Leizig Remote Controller (SKU 30600152) is the OEM remote control accessory designed specifically for Leizig commercial dehumidifiers charged with R32 refrigerant. Leizig's commercial dehumidifier lineup — spanning from the LG195 at 195 pints/day through the LG880 at 880 pints/day — is offered in both R32 and R410a refrigerant variants. The control electronics and refrigerant circuitry are calibrated to the specific refrigerant the unit was built around, which means the remote controller must match the refrigerant type of the host dehumidifier. This listing covers the R32-specific version. If your Leizig unit is charged with R410a, the companion R410a controller is the correct accessory — not this one.

Refrigerant matching is not optional. R32 and R410a operate at different pressures and have different thermodynamic properties; control logic calibrated for one will read conditions incorrectly on the other, leading to poor humidity regulation or potential equipment faults. Order by confirming the refrigerant type listed on your unit's nameplate before purchasing.

Where It Fits in a Commercial Build

Leizig dehumidifiers are purpose-built for commercial cultivation environments — galvanized steel construction with corrosion-resistant coatings, MERV-8/13 filtration, and RS485 MODBUS integration on every model. They are designed for continuous 24/7 duty cycles in high-humidity, nutrient-dense grow rooms where moisture removal is a non-negotiable constant.

In most commercial installations, the dehumidifier itself is mounted overhead, in a mechanical chase, or in an adjacent equipment room — out of easy reach for manual adjustments. A wall-mount remote controller brings all primary controls to a fixed, accessible point on the grow room wall: operators can monitor conditions and make setpoint changes at eye level without ladders, lifts, or interrupting the environment. This is especially relevant in multi-tier vertical grows and large single-room operations where the dehumidifier may be duct-mounted far from the canopy.

The R32 vs. R410a Distinction — Why It Matters

Leizig produces units in both R32 and R410a refrigerant configurations. R32 is a single-component refrigerant with a global warming potential (GWP) of approximately 675 — significantly lower than R410a's GWP of roughly 2,088. Beyond environmental profile, R32 offers superior thermodynamic efficiency and requires a smaller refrigerant charge relative to R410a for equivalent capacity. These differences mean the two refrigerant systems are not interchangeable, and neither are the controllers calibrated for each.

The EPA has been progressively tightening regulations on high-GWP refrigerants. Operators specifying new dehumidification equipment or replacing aging R410a units should verify which refrigerant their replacement units carry and ensure every accessory — including remote controllers — is matched accordingly. When in doubt, the refrigerant type is listed on the unit nameplate. Always confirm before ordering a replacement or additional controller.

Ordering and Compatibility Notes

This controller (SKU 30600152) is the R32 variant. Leizig also offers a separate remote controller for R410a-equipped units — confirm your dehumidifier's refrigerant type on the nameplate before placing an order. If you are unsure which version your unit requires, reach out before ordering; a mismatched controller is a non-functional accessory.

Hydro Supply Co. supplies Leizig equipment and accessories to licensed cannabis and hemp cultivation operations nationwide. Whether you are outfitting a single dedicated room or a multi-room commercial facility, we can help you spec the correct controller alongside the right dehumidifier capacity for your canopy footprint and transpiration load. Use the Request a Quote button to connect directly.

Specifications

SKU30600152
BrandLeizig
Refrigerant CompatibilityR32 only — not compatible with R410a units
Product TypeOEM Remote Controller / Wall-Mount Accessory
Compatible EquipmentLeizig R32 dehumidifier models (LG195–LG880 R32 variants)
InstallationWall-mount
ApplicationCommercial cultivation, grow rooms, cannabis and hemp facilities

Frequently Asked Questions

How do I know if my Leizig dehumidifier uses R32 or R410a?

Check the unit's nameplate — the refrigerant type is printed there. R32 and R410a units are distinct configurations. If you cannot locate the nameplate or the label is worn, contact Leizig or your equipment supplier with the model number before ordering a remote controller.

Can I use this R32 controller on my R410a Leizig unit?

No. The R32 and R410a remote controllers are refrigerant-specific. Using the wrong controller on your unit will result in improper operation. Leizig offers a separate remote controller SKU for R410a-equipped dehumidifiers. Always match the controller to the refrigerant type of your unit.

Why does the controller need to be refrigerant-matched at all?

R32 and R410a have different operating pressures and thermodynamic properties. Control systems calibrated for one refrigerant type will misread conditions in a unit running the other, resulting in incorrect humidity setpoint execution and potential equipment faults. The controller must match the unit it's communicating with.

Does this controller work with Leizig's RS485 MODBUS integration?

The Leizig dehumidifier line includes RS485 MODBUS and remote dry contact input on every model from the LG195 through the LG880 for integration with commercial environmental controllers. The remote controller accessory provides local wall-mount control; confirm with your integration setup whether both the remote controller and MODBUS interface will be used simultaneously in your facility's control architecture.

Can Hydro Supply Co. supply both the Leizig dehumidifier and this controller together?

Yes. HSC supplies Leizig dehumidifiers and accessories to licensed cannabis and hemp operators nationwide. If you are speccing a new installation or adding remote control capability to an existing Leizig unit, request a quote and we will confirm compatibility and coordinate supply for your facility.

Ready to spec this for your facility?

Get operator-direct pricing and availability. We supply licensed commercial cultivators nationwide.

Request a Quote