OEM-matched MERV 13 filter for the Leizig LG195 R410a commercial dehumidifier — tool-free swap.
The Leizig MERV 13 Replacement Filter (SKU 31800011) is the factory-matched air filter for the Leizig LG195 R410a dehumidifier. Sized and rated specifically for the LG195, it installs without tools and restores full airflow and filtration efficiency between service intervals.
The Leizig MERV 13 Replacement Filter (SKU 31800011) is the factory-specified air filter for the Leizig LG195 dehumidifier — a 195-pint-per-day R410a refrigerant unit designed for commercial cultivation environments. The LG195 is rated at 7.0 pints/kWh efficiency with 600 CFM of airflow, making it the most efficient unit in the Leizig lineup. Keeping that airflow clean and unrestricted is what this filter is built to do.
MERV 13 filtration captures fine particulates, dust, and airborne microorganisms that circulate in active grow environments — the same contaminants that compromise canopy health and drive PM pressure in sealed flower rooms. The LG195's filtration system is rated for the MERV 11/13 range; this filter sits at the top of that range for operators who want maximum particulate capture alongside their dehumidification.
Any licensed cannabis or hemp operator running a Leizig LG195 dehumidifier in continuous-duty cultivation, drying, or processing environments needs this filter on hand. Commercial dehumidifiers running 24/7 in high-transpiration flower rooms accumulate particulate load quickly. A clogged or degraded filter restricts airflow through the evaporator coil, reducing moisture removal capacity and forcing the compressor to work harder — both outcomes you want to avoid mid-run.
This is a maintenance consumable, not an optional upgrade. If you have one or more LG195 units in operation, keeping spare filters on-site is standard practice. Filter inspection is recommended every 30 to 60 days under normal cultivation conditions; high-canopy-density or high-dust environments may require more frequent checks. Having a replacement ready means no downtime when it's time to swap.
In a sealed or semi-sealed grow room, the dehumidifier is one of the primary air movers. The intake filter is the first line of defense between the ambient grow environment — carrying pollen, spores, dust, and nutrient particulates — and the internal components of your dehumidification system. A MERV 13-rated filter captures fine particulates that a lower-rated filter passes through, which is especially relevant in facilities managing powdery mildew pressure or operating with recirculated air.
Dirty filters reduce moisture removal performance and increase energy consumption. Maintaining clean filtration keeps the LG195 operating at its rated 7.0 pints/kWh efficiency and full 600 CFM airflow, which directly supports stable vapor pressure deficit (VPD) management across your canopy. There is no mechanical downside to running a clean filter at the correct rating — only upside for crop health and equipment longevity.
The Leizig LG195 is designed for quick field filter replacement without tools. The filter access panel is operator-serviceable, meaning your facility maintenance staff can complete the swap during routine room checks without scheduling a service call. This is a deliberate design decision by Leizig to support continuous commercial operations where downtime is costly.
For multi-unit operations running several LG195 dehumidifiers across multiple rooms or facilities, HSC can coordinate filter supply in quantities that match your maintenance cycle. Request a quote for single-unit replacement stock or bulk quantities. Nationwide supply — wherever your licensed facility operates.
| SKU | 31800011 |
| Brand | Leizig |
| Filter Rating | MERV 13 |
| Compatible Unit | Leizig LG195 R410a Dehumidifier |
| LG195 Dehumidification Capacity | 195 pints/day |
| LG195 Refrigerant | R410a |
| LG195 Airflow | 600 CFM |
| LG195 Efficiency | 7.0 pints/kWh |
| Installation | Tool-free field replacement |
| Recommended Inspection Interval | Every 30–60 days |
This filter (SKU 31800011) is matched to the Leizig LG195 R410a dehumidifier. Other Leizig models — the LG228 through LG880 — use a different filter specification (MERV 8/13). Do not substitute across model lines without confirming fitment with Leizig documentation.
Leizig recommends inspecting the filter every 30 to 60 days under standard commercial cultivation conditions. Environments with higher particulate loads — heavy canopy, coco media, high-traffic rooms — may require more frequent inspection and replacement. Replace the filter whenever airflow restriction is visible or measurable, regardless of calendar interval.
Yes, materially. Restricted airflow across the evaporator coil reduces the unit's ability to condense moisture from the air. The LG195 is rated at 7.0 pints/kWh and 600 CFM at clean-filter conditions. A blocked filter degrades both figures, resulting in lower actual pints-per-day output and higher energy consumption per pint removed — exactly the wrong direction in a humidity-critical flower room.
No. The Leizig LG195 filter is designed for tool-free field replacement by facility staff. No refrigerant handling, electrical work, or specialized tools are required for a filter change. It is a routine maintenance task.
Yes. HSC supplies licensed cannabis and hemp operators nationwide and can accommodate single-unit or multi-unit bulk filter orders. Request a quote with your unit count and preferred stocking quantity and we will coordinate from there.
Get operator-direct pricing and availability. We supply licensed commercial cultivators nationwide.
Request a Quote