OEM-matched ducting accessory for the Leizig LG195 195-pint/day R410a dehumidifier.
The Leizig Duct Kit (SKU 31800016) is the manufacturer-matched ducting accessory for the LG195 R410a commercial dehumidifier, enabling ducted intake or discharge configurations in sealed cultivation rooms. Verify your unit model before ordering — this kit is spec'd to the LG195.
The Leizig Duct Kit is the OEM-designated ducting accessory matched to the LG195 dehumidifier — the entry-level commercial unit in Leizig's R410a lineup. It enables operators to transition the LG195 from a free-discharge configuration into a ducted setup, directing conditioned air to specific zones within a sealed grow room or routing intake and exhaust through the facility's existing ductwork.
Ducted configurations are particularly useful when the LG195 is ceiling-suspended: processed, drier air can be directed across a defined canopy zone rather than discharged broadly into the room. This matters in multi-zone facilities where humidity management needs to be targeted rather than generalized. The kit is purpose-built for the LG195 — it is not a universal accessory. Cross-check your unit's model number before ordering.
The Leizig LG195 removes 195 pints of moisture per day using an R410a refrigerant system rated at 7.0 pints/kWh — the highest efficiency figure in Leizig's commercial lineup. It moves 600 CFM of air and accepts 110–240VAC single-phase power at 50/60 Hz, making it the most electrically flexible unit in the Leizig range and accessible to facilities that aren't yet on dedicated 208–277V or 480V commercial circuits.
Every LG195 ships with RS485 (MODBUS) compatibility and a remote dry contact input for direct integration with environmental controllers. The unit supports four physical installation configurations — ceiling-suspended (hoisted), wall-mounted, floor cabinet, and freestanding — and includes a standard 3/4" NPT drain connection for continuous condensate removal without reservoir management. The duct kit unlocks the full value of ceiling-suspension by enabling directed airflow rather than open-room discharge.
This kit is for licensed cannabis and hemp cultivation operators running the LG195 in a sealed grow room who need to duct the unit's airflow — either to address hot/humid dead zones, to comply with facility design specs that route HVAC through walls or ceilings, or to integrate the dehumidifier into a centralized air-distribution layout.
It is also the right order for operators replacing a damaged or missing duct connection on an existing LG195 installation. If you are building out a new room around the LG195 and plan to run the unit overhead with any directed airflow, order this kit alongside the primary unit. Leizig's lineup supports four mounting configurations, and ceiling-suspended operation with ducting is specifically identified by Leizig as a primary use case for targeted moisture removal across defined canopy zones.
This duct kit (SKU 31800016) is matched to the LG195 specifically. Leizig manufactures separate duct kits for other models in the lineup (LG228, LG335, LG508, LG880) — collar dimensions and airflow ratings differ between units. Ordering a kit from the wrong model tier will result in a poor fit and potential airflow restriction.
If you are expanding a facility and adding LG195 units to new rooms, HSC can coordinate duct kits and primary units together. Contact us for lead time on either. For operators evaluating whether the LG195 is correctly sized for their canopy load, or whether a higher-capacity unit in Leizig's line would be a better fit, reach out — we can work through the pint-per-day math with you before you commit.
| SKU | 31800016 |
| Compatible Model | Leizig LG195 |
| Refrigerant (Parent Unit) | R410a |
| Parent Unit Capacity | 195 pints/day |
| Parent Unit Efficiency | 7.0 pints/kWh |
| Parent Unit Airflow | 600 CFM |
| Parent Unit Voltage | 110–240VAC, single-phase, 50/60 Hz |
| Parent Unit Drain Connection | 3/4" NPT |
| Mounting Configurations Supported | Ceiling-suspended, wall-mounted, floor cabinet, freestanding |
| Controller Integration (Parent Unit) | RS485 / MODBUS, remote dry contact |
No. This kit is matched to the LG195 specifically. Leizig produces separate duct accessories for the LG228, LG335, LG508, and LG880. Collar dimensions and airflow specs vary between models — using the wrong kit risks airflow restriction and reduced dehumidification performance. Confirm your unit's model number before ordering.
No. The duct kit is only required if you intend to direct the unit's intake or discharge through ductwork — for example, when the unit is ceiling-suspended and you want to route processed air to a specific canopy zone, or when facility design requires airflow to move through walls or ceiling cavities. Free-discharge installations don't require this accessory.
Yes. Every Leizig LG195 includes RS485 (MODBUS) compatibility and a remote dry contact input, allowing direct integration with environmental controllers for automated humidity and VPD management. The duct kit itself is a passive mechanical accessory and does not affect control wiring.
The LG195 accepts 110–240VAC single-phase power at 50/60 Hz. This is the widest voltage range in Leizig's commercial lineup and makes the LG195 compatible with standard US residential circuits as well as commercial single-phase service — no transformer required in most installations.
Yes. HSC supplies the Leizig LG195 dehumidifier and accessories including this duct kit. If you're outfitting a new room or expanding an existing installation, request a quote and we'll confirm availability and lead time on both items together.
Get operator-direct pricing and availability. We supply licensed commercial cultivators nationwide.
Request a Quote