FloraFlex 700w LED Grow Light

What It Is

The FloraFlex 700W is an 8-bar full spectrum LED grow light built around custom diodes spanning four wavelengths: 3000K warm white, 5000K cool white, 660nm deep red, and 730nm far red. That combination covers every phase of the crop cycle — germination and vegetative establishment through late-flower finish — without requiring supplemental bars or spectrum swaps between stages.

At 700W draw (nominal), the fixture produces 1,890 µmol/s PPF at a verified 2.7 µmol/J efficacy. Passive thermal management handles heat dissipation with no moving parts, rated for continuous operation in ambient temperatures up to 95°F (35°C) — relevant for sealed or high-temp flower rooms. The 120° beam angle from the 8-bar array distributes photons across the canopy without hot spots, with recommended mounting heights of 12 to 24 inches above the canopy for bloom.

Who It's For

This fixture is sized for licensed indoor cannabis and hemp operators running 4×4 ft per-light footprints in flower — the standard spacing in most licensed single-tier and multi-tier builds. At 5×5 ft it covers vegetative production efficiently, making it practical for dedicated veg rooms or facilities that run the same fixture type throughout. The 120V–277V input range means it installs into any commercial electrical infrastructure without additional transformers.

Multi-light rooms are where the 0-10V dimming and daisy-chain capability matter: you can integrate the entire room into a compatible third-party controller or the FloraFlex Master Lighting Controller, set ramp schedules, and manage intensity uniformly across zones without per-fixture manual adjustments. For operators who need rebate qualification on capital equipment, DLC listing puts this fixture on most utility program eligibility lists — worth confirming with your local utility before purchase.

Key Features

The 8-bar form factor distributes diodes across the full canopy footprint rather than concentrating output at a single point, producing measurably more uniform PPFD across the 4×4 bloom area. Passive cooling — no fans, no moving parts — eliminates fan noise and one of the more common failure points in commercial LED fixtures. The fixture is rated L90 > 50,000 hours, meaning it retains 90% of initial lumen output past that mark.

Assembly is tool-free and documented at under five minutes: bars, structure rails, power supply, and cables snap together and plug in. The onboard dimmer provides stepped settings (100%, 70%, 50%, 30%, off) for manual control; the RJ-port 0-10V interface allows smooth, granular intensity control when wired to a compatible controller. Multiple fixtures daisy-chain for simplified power runs in large rooms. A 240V power cord ships included; a free 120V or 277V cord is also provided.

How It Fits a Commercial Build

In a single-tier flower room, the 700W slots into a standard 4×4 ft grid layout. Its 41.57-inch length and 7.28-inch width keep inter-fixture spacing tight enough for full canopy coverage without overlap gaps. At 15.43 lbs the fixture is light enough for single-person installation on standard grow room unistrut or pallet racking overhead structure.

The 120–277V input flexibility means you're not locked into a specific electrical spec — useful when deploying across multiple facility types or retrofitting a room that previously ran double-ended HPS. Because it's DLC listed (UL 8800 + UL 1598), it clears the horticultural safety standard most commercial insurance carriers and AHJs require for indoor cultivation electrical sign-off. The five-year standard warranty provides a credible service-life baseline for depreciation planning.