Purpose-built hardware to flush-mount Faven under-canopy bars to bench or rack rail undersides.
The Faven Top Mount Bracket is the clean, purpose-built solution for securing Faven under-canopy LED bars directly to the underside of a rolling bench rail or vertical rack crossmember. Each package includes two pairs (four brackets total), giving you everything needed to mount two fixture attachment points per order.
The Faven Top Mount Bracket is a dedicated mounting accessory for Faven under-canopy LED bars — the R6, R8, and Chroma fixture lines. It is designed to attach to the underside of a bench rail or rack crossmember, holding the fixture in an inverted top-mount position inside the plant canopy rather than resting on a floor stand.
Each package contains two pairs — four individual brackets — engineered specifically for Faven's fixture housing geometry. This is not a generic bracket adapted for the purpose; it is a Faven-spec accessory designed to interface directly with their bar fixtures and maintain the correct positioning and fixture stability required for consistent mid-canopy light delivery.
This bracket is the right choice for any commercial or large-scale indoor cultivation facility running Faven under-canopy bars on rolling benches or fixed vertical racking. If your benches have a steel rail frame — or your racks have horizontal crossmembers at the appropriate mid-canopy height — the top mount bracket eliminates the need for floor stands, freeing up space at the substrate level and simplifying end-of-run teardown.
Facilities that want a cleaner installation than DIY stand alternatives (inverted pots, PVC rigs, unistrut builds) will find the top mount bracket the most efficient permanent solution. It is particularly useful in high-density canopy configurations where floor-level obstruction from stands creates interference with irrigation lines, airflow equipment, or harvest workflows. Operations standardizing on Faven infrastructure across multiple rooms benefit from a consistent, repeatable mounting solution that installs the same way in every bay.
Purpose-built compatibility: The bracket is designed to the dimensional specs of Faven's under-canopy bar housing, so fitment is exact — no shimming, adapting, or field fabrication required. The fixture clips in and stays in.
Top-mount orientation: Mounting to the underside of the bench rail or rack crossmember positions the fixture above the substrate plane, consistent with Faven's recommended placement guidance — base of the fixture no lower than the substrate lip, ensuring no wasted light output directed into the grow medium. This orientation also keeps the fixture's IP66-rated housing exposed to the canopy environment it was built for, with full access to the daisy-chain connector ports on each end.
Two-pair package: Each order of SKU 10-010508-001 contains two pairs (four brackets). Scale your order to match the number of fixture mounting points in your build — one pair per fixture end attachment.
Faven under-canopy bars are a supplemental lighting layer that addresses the lower canopy zone — the region overhead fixtures cannot efficiently penetrate through a dense top canopy. At commercial flowering densities, the lower third of the plant receives substantially reduced PPFD relative to the top. Under-canopy bars running at supplemental intensities fill that deficit, supporting denser bud development and more uniform cannabinoid and terpene expression across the full plant.
The mounting method matters for long-term operational efficiency. Floor stands work at smaller scales and for growers frequently repositioning fixtures between runs, but in a permanent commercial installation, top-mounting to bench rails integrates the fixtures into the bench structure itself. Fixtures stay at a fixed, repeatable height relative to the rail, keeping canopy positioning consistent across every bench in the room. At harvest and turn-over, fixtures stay mounted — cleaning and reset workflows move under the fixed bars rather than around loose stand hardware.
If you are sizing a new under-canopy installation or adding this hardware to an existing Faven deployment, contact HSC to confirm bracket quantities for your bench count and fixture layout before ordering.
| SKU | 10-010508-001 |
| Brand | Faven |
| Package Contents | 2 pairs (4 brackets total) |
| Mounting Type | Top-mount, inverted — attaches to underside of bench rail or rack crossmember |
| Compatible Fixtures | Faven R6, R8, Chroma under-canopy LED bars |
| Compatible Structures | Rolling bench rails, fixed rack crossmembers |
| Catalog Category | Lighting Accessories |
| Site Section | Lighting & Cultivation |
Each package (SKU 10-010508-001) contains two pairs — four individual brackets total. One pair covers the two mounting points at each end of a single Faven under-canopy bar. Order one package per fixture if you are mounting two attachment points per bar, or plan your quantity based on your total fixture count and bench rail configuration.
The top mount bracket is designed for Faven's under-canopy LED bar lineup, including the R6, R8, and Chroma fixture models. It is not intended for use with Faven's top-canopy overhead fixtures. If you are unsure whether this bracket fits a specific Faven SKU in your build, contact HSC before ordering.
The bracket is designed to attach to the underside of a rolling bench rail or a fixed vertical rack crossmember. It is suited for standard steel-framed commercial benching and racking structures common in licensed indoor cannabis and hemp facilities. It is not designed for overhead wire hangers or ceiling-mount applications — those use a different mounting approach.
Top-mounting integrates the fixture into the bench structure and keeps it at a fixed, consistent height relative to the rail across every run. Floor stands — whether Faven's adjustable stands or DIY alternatives — are repositionable but introduce hardware at the substrate level that can interfere with irrigation lines, airflow, and harvest workflows in dense commercial configurations. For permanent installations with consistent canopy heights, top-mounting is typically the cleaner, more repeatable solution.
The top mount bracket provides the fixture-to-rail attachment hardware. You will still need the Faven under-canopy fixtures, appropriate power cords, jumper/daisy-chain cables, and a compatible controller or dimmer (sold separately). If you are building out a full under-canopy system, contact HSC to review your fixture count, cable run lengths, and controller requirements so you receive everything needed to complete the installation in one order.
Get operator-direct pricing and availability. We supply licensed commercial cultivators nationwide.
Request a Quote