480V bare-wire source cord for Faven R-series under-canopy fixtures — discontinued, limited stock remaining.
Faven 480V Power Cord BARE 1.0 (SKU 10-010704-362) is the 480V bare-wire (hardwire) source cord for Faven R-series under-canopy LED fixtures. This part is discontinued — Faven is running out remaining units and will not restock. Verify availability before quoting into any active project.
The Faven 480V Power Cord BARE 1.0 is the 480V-rated source power cord for Faven's R-series under-canopy LED bar fixtures, with a bare-wire (BARE) termination on the facility end for hardwired installation into a junction box, disconnect, or panel — rather than a plug-and-socket connection. This makes it the correct cord for facilities that run 480V three-phase or 480V single-phase branch circuits to their grow rooms and require hardwired, electrician-terminated connections.
Faven's R-series fixtures — the R6 and R8 under-canopy bars — use a daisy-chain power architecture in which a single source power cord feeds the first fixture in the run, and extension jumpers carry power down the bench from there. The source cord is the only point where facility power enters the chain, so matching cord voltage to facility voltage is a hard electrical requirement. The 480V BARE variant exists specifically for commercial facilities built or retrofitted on 480V infrastructure.
This cord is relevant to a narrow, specific use case: licensed indoor cannabis or hemp cultivation facilities with 480V electrical infrastructure that have already deployed — or are specifying — Faven R6 or R8 under-canopy fixtures, and whose electrical design requires a hardwired (bare-wire) termination rather than a standard plug. That typically means Class E or larger commercial builds where the electrician terminates directly into a local disconnect or subpanel rather than plugging into a receptacle.
If your facility runs 120V, 240V, or 277V circuits, this is not your cord — Faven produces voltage-specific cords for each of those configurations, and using mismatched voltage is both a code violation and a fixture risk. Confirm your branch circuit voltage with your licensed electrician before ordering any Faven source cord.
Faven has confirmed this part is discontinued and will not be restocked. HSC is offering remaining inventory on a first-come basis. Once units are gone, no additional supply is available through this SKU. Do not specify this cord into a new project with a long lead time, a phased build, or a future expansion that will need additional cords — you will not be able to reorder.
If you are mid-project and need this specific cord, contact HSC to confirm current unit count before committing. If you are in early planning and your facility is on 480V infrastructure, ask about available alternative termination options. For established Faven R-series installations already running on this cord where a spare or replacement is needed, checking stock now — rather than at next harvest — is the right move.
Faven's R-series fixtures connect in a daisy-chain configuration across a bench. Each independent chain requires exactly one source power cord at the head of the run — that is this product. Extension jumper cables carry the signal and power between fixtures within the chain. If a bench exceeds the maximum fixture count for the voltage and circuit, the run must be split into two or more separate chains, each requiring its own source cord.
The bare-wire termination means installation requires a licensed electrician to make the panel or disconnect connection — this is not a plug-in cord. Build the electrician's scope into your project timeline accordingly. Because this part is discontinued, ordering any spare or backup unit at the same time as your primary order is worth considering.
| SKU | 10-010704-362 |
| Brand | Faven Lighting |
| Voltage Rating | 480V |
| Termination Type | BARE (bare-wire / hardwire) |
| Compatible Fixtures | Faven R6, R8, R8 FR under-canopy LED bars |
| Role in System | Source / head-of-chain power cord |
| Installation Method | Hardwired — electrician termination required |
| Availability | Discontinued — remaining stock only, no restock |
| Catalog Category | Cables & Accessories / Lighting & Cultivation |
No. Faven's Chroma under-canopy fixtures use a different power cord than the R-series. This cord (10-010704-362) is compatible with Faven R6, R8, and R8 FR fixtures only. Do not use R-series cords on Chroma fixtures.
BARE indicates a bare-wire termination on the facility end of the cord — there is no plug or connector. The installer (licensed electrician) terminates the bare conductors directly into a junction box, local disconnect, or subpanel. This is distinct from Faven's plug-terminated cords, which use a specific NEMA connector and can be connected to a matching receptacle without an electrician.
No. This cord is voltage-rated at 480V and is the correct cord only for 480V branch circuits. Faven produces separate, voltage-matched cords for 120V, 240V, and 277V circuits. Connecting a 480V cord to a lower-voltage circuit — or vice versa — is a code violation and creates a safety and fixture risk. Confirm your facility's branch circuit voltage before ordering.
Each independent daisy-chain run requires one source cord. If your bench is small enough to run as a single chain within the circuit's fixture-count limit, one cord handles the bench. If your fixture count or bench length exceeds the per-chain maximum for your voltage and circuit, you split into multiple chains — each needing its own source cord. Contact HSC with your bench layout for confirmation before ordering.
Once remaining stock is depleted, this SKU will not be restocked — Faven has confirmed end-of-life for this part. If you anticipate needing a spare or replacement down the line, order it now while units are still available. If you are planning a future expansion on 480V infrastructure, consult HSC about alternative wiring solutions before that build begins.
Get operator-direct pricing and availability. We supply licensed commercial cultivators nationwide.
Request a Quote