IP56-rated modular enclosure purpose-built for TrolMaster Hydro-X Pro and Aqua-X Pro control systems.
The TrolMaster SCC-1 is a 25" (63.5 cm) modular electrical enclosure and wire management system designed specifically for the Hydro-X Pro and Aqua-X Pro controllers. It consolidates your controller, device stations, power supplies, modules, and RJ12 cabling into a single, clean, IP56-rated cabinet rated for commercial grow environments.
The TrolMaster SCC-1 is a 25-inch standard controller cabinet engineered as a modular electrical enclosure and wire management solution for TrolMaster's Hydro-X Pro (HCS-2) and Aqua-X Pro (NFS-2) control systems. Rather than leaving your controller, device stations, and cable runs exposed on a wall or bench, the SCC-1 consolidates everything into one enclosed, professionally mounted unit.
The enclosure features a pre-cut opening sized for the TrolMaster main controller, so installation is clean and repeatable across facilities. Internal splitter boards — five groups totaling well over 40 RJ12 ports — accommodate the full range of TrolMaster sensors and device stations without cable sprawl. A structured set of internal power outlets (4 + 1 + 6 configuration) keeps power supplies and modules seated and organized inside the cabinet.
Any licensed cannabis or hemp cultivation facility running TrolMaster Hydro-X Pro or Aqua-X Pro controllers in a commercial setting. If your team has deployed TrolMaster across multiple rooms or zones, the SCC-1 is the difference between a professional control panel installation and a wall of loose hardware and dangling cables that technicians and compliance auditors notice immediately.
The SCC-1 is also the right spec for new builds and retrofits where environmental control is centralized. Facilities upgrading from basic timer-based setups to a full TrolMaster automation layer benefit from having a proper enclosure from day one — it protects the investment, makes troubleshooting faster, and keeps moisture and particulates off sensitive electronics during active grow cycles.
IP56 ingress protection (equivalent to NEMA 4X rating) is the headline specification for grow room use. This rating means the cabinet resists strong water jets and dust ingress — relevant in environments with overhead irrigation, humidification systems, or high-pressure cleaning. To achieve the full IP56 rating, the included controller rubber gasket must be fitted correctly between the controller face and the cabinet door.
Five internal splitter board groups handle RJ12 routing across the top (10-port, 6-port, and 17-port boards), middle (two 4-port detachable splitter bars), and bottom (6-port board) of the cabinet. The 4 + 1 + 6 internal power outlet layout gives you dedicated mounting positions for OA6-24/OA6-110 power supplies and accessory modules. Short and long RJ12 cables are included in the package, so the cabinet arrives ready to wire.
In a single-room setup running a Hydro-X Pro controller with several device stations — CO2, temp/humidity, lighting, HVAC, irrigation — the SCC-1 provides one wall-mount point for the entire control stack. Every sensor cable terminates at the cabinet; every power connection for modules is contained inside it. The result is a tighter, more auditable installation that's faster to diagnose when something needs adjustment.
For multi-room facilities, the SCC-1 pairs with TrolMaster's larger SCC-2 (35-inch) cabinet if zone expansion requires more splitter capacity. HSC supplies the full TrolMaster control system line — controllers, device stations, sensors, and enclosures — so you can spec the complete package through a single account rather than sourcing components separately. Request a quote to confirm configuration and lead time for your facility.
| SKU | SCC-1 |
| Compatible Controllers | TrolMaster Hydro-X Pro (HCS-2), Aqua-X Pro (NFS-2) |
| Dimensions | 25" (L) × 18" (W) × 6.26" (H) / 63.5 × 45.7 × 15.9 cm |
| Enclosure Rating | IP56 (equivalent to NEMA 4X) |
| Operating Temperature | 32°F – 104°F (0°C – 40°C) |
| Input Voltage | 120V |
| Maximum Amperage | 15A |
| Internal Power Outlets | 4 + 1 + 6 configuration |
| Splitter Board Capacity | Boards #1–#5: 10 / 6 / 17 / 2×4 (detachable) / 6 ports (RJ12) |
| Included | Controller rubber gasket, long RJ-12 cables, short RJ-12 cables, power cables, screw set, manual |
Yes. The SCC-1 is designed for both the TrolMaster Hydro-X Pro (HCS-2) and the Aqua-X Pro (NFS-2). The pre-cut controller opening and internal splitter board layout accommodate either system.
The SCC-1 is 25 inches long and includes a 4+1+6 internal power outlet layout with two middle splitter bars (2×4 ports). The SCC-2 is 35 inches long, expands the middle splitter bars to 4×4, and increases the internal power outlets to 8+1+6 — suited for larger installations with more device stations.
To achieve the rated IP56 protection, you must install the included controller rubber gasket between the controller face and the cabinet door. Without the gasket properly seated, the enclosure does not meet the IP56 standard.
The SCC-1 houses five splitter board groups: a 10-port board, a 6-port board, a 17-port board, two detachable 4-port middle splitter bars, and a 6-port bottom board — providing a large number of RJ12 connection points to accommodate sensors, device stations, and modules across the Hydro-X Pro or Aqua-X Pro system.
Yes. HSC supplies the full TrolMaster control system line including controllers, device stations, sensors, and enclosures. Request a quote and we'll confirm lead time and bundle the full configuration for your facility.
Get operator-direct pricing and availability. We supply licensed commercial cultivators nationwide.
Request a Quote